Article

Luxury made-to-measure men's shirt: how to recognise one

Luxury, in a shirt, is not the logo on the pocket. It is what you see when you turn it inside out: the seams, the buttons, the fabric, and how it falls on you.

The fabric laid out on the table, before cutting
The fabric laid out on the table, before cutting

The details mentioned in this article are those of the three Piacemolto collections — Essenzia, Maestria and Sartoria — each described on its own page.

Luxury shows on the inside

Two white shirts hanging side by side look alike. The difference between a high-end shirt and any other is not in the colour or the cut of the collar: it is in the materials and the construction, that is, in what you discover by touching it, turning it over and wearing it for a whole day.

This is why price alone is not enough to recognise one, and the brand even less so. Five checks really count: the fabric, the seams, the buttons, the handwork and the fit. Let us look at them one by one.

The fabric: fine, two-ply cotton

A luxury shirt starts from a fine fabric. In two-ply cotton each yarn is made of two finer yarns twisted together: the fabric is stronger, denser and smoother to the touch, and it stands up to washing without losing its shape.

Every Piacemolto shirt is made of two-ply cotton, even in the simplest collection. In the Sartoria collection you reach the Super Luxury fabrics, chosen for their quality, their refinement and the quality of the fibre.

Two-ply: two yarns twisted together into a single yarn, denser and stronger
Two-ply: two yarns twisted together into a single yarn, denser and stronger

The seams: a single needle

Look at the seam along the side and under the sleeve. On a high-quality shirt it is sewn with a single needle: a painstaking technique that closes the seam in on itself and leaves it clean both outside and inside.

The result shows over time: the seam stays flat, does not open and stands up to washing. It is one of the details that set fine shirtmaking apart from a mass-produced shirt.

The details you do not notice, but feel

The yoke — the piece that joins the shoulders — cut in two pieces rather than one, to follow the natural slope of the shoulders. The sleeve sewn slightly rotated, the way the arms hang at rest. The bottom buttonhole set horizontally, so the shirt stays closed when you sit down.

And shank-sewn buttons: not sewn flat against the fabric, but on a small stem of thread that lifts them just enough for buttoning to be smooth and for the fabric not to pull. These are details nobody notices when they look at you, and that you feel from morning to night.

The handwork

This is where a premium shirt becomes a tailored shirt. In the Maestria collection the armhole is finished by hand all the way round, the sleeve placket has its reinforcing bar tack and the monogram is embroidered by hand.

The Sartoria collection goes further: the shoulder is finished by hand, the buttonholes are sewn and finished by hand one by one, the buttons are attached by hand and the hems are finished by hand. Each detail adds time, and time is precisely the raw material of luxury.

A buttonhole sewn by hand: one of the details of the Sartoria collection
A buttonhole sewn by hand: one of the details of the Sartoria collection

The buttons: mother-of-pearl, not plastic

The button is the detail you touch most often, and the easiest to check. Mother-of-pearl is cool to the touch, has deep reflections that change with the light, and each button is slightly different from the next, because it is a natural material.

On our Essenzia shirts we use Trocas mother-of-pearl; the Maestria collection has Australian mother-of-pearl buttons, with a natural lustre and different shades in every button. A plastic button, by comparison, is lukewarm, uniform and light.

Made to measure: the luxury you cannot buy in a shop

A luxury shirt that pulls across the chest or leaves the cuff halfway down the palm is still the wrong shirt. Fit is the toughest test, and a standard size cannot pass it: it is built for an average body, not for yours.

Made to measure starts from your measurements — neck, chest, shoulders, sleeves, wrists — and from how you want the shirt to fall, slimmer or softer. First of all, you take your measurements; the rest comes after.

The pattern marked in chalk on the fabric, to the measurements of the person who will wear it
The pattern marked in chalk on the fabric, to the measurements of the person who will wear it

The five checks, in brief

Before choosing a high-end shirt, ours or anyone else's, two minutes and these five checks are enough.

The checkWhat to look atThe sign of quality
The fabricFeel and weave, against the lightTwo-ply cotton, dense and smooth
The seamsSides and under the sleeveA single needle, clean inside too
The buttonsTemperature and reflectionsMother-of-pearl: cool, iridescent, each one different
The buttonholesThe stitches, against the lightClose and even, the bottom one horizontal
The fitNeck, shoulders, cuffsNo pulling creases: it follows your measurements

Design your shirt: choose the collection, the fabric and every detail. It is made to your measurements.

Design your shirt

Completa il tuo ordine

Registrati
oppure
Accedi al tuo account
oppure